1937 3 x 5 temperature sender needed

dave s
dave s Senior Contributor, Moderator
edited May 2012 in HUDSON
I need source for temperature sender for a 1937 3 x 5 engine. I tried using a 1839-50 sender with an adapter, but it reads too high. Thank you.

Comments

  • [Deleted User]
    [Deleted User]
    I have an engine from a 37 with sending unit in it. I dont know its condition but its available if you want it,
    Roger
  • dave s
    dave s Senior Contributor, Moderator
    The 39 is too short. One I need is about 3" long with 1/2" pipe thread. I will get a picture, when I am at garage.
  • hudsontech
    hudsontech Senior Contributor
    edited May 2012
    According to the 1927-1950 Numerical Parts Interchange book, Element-Cyl Hd Temp Indicator part number 150553, was used on 1936 Models 62-67 and 1937-1938 all models.
    (Model 61's didn't have a temperature gauge.)

    This information is available in the online library @:

    http://hetclub.org/burr/lithomepage.htm (the 1927-1950 parts book is in the Other Hudson-Essex-Terraplane Literature file.


    Hudsonly,
    Alex Burr
    Memphis, TN
  • dave s
    dave s Senior Contributor, Moderator
    Thanks, Alex. I just need to find one. I am picking up a used one fdrom Dave Kostansek tomorrow and I will see if it works.
This discussion has been closed.

Categories

In this Discussion